Design Futures (Making the Light)

To was mainly about learning how construct the light together with all the wires. First Mr Ward showed us how to make a hole in the Jarra wood for the wires to go through. For that we needed a electric drill and we then drilled it through the aluminium and the wood. Then he showed us the LED light we will be using. He then told us to cut it to the length we would need it to. We then cut the wire to length we needed it to. After, we cut the rubber off and twisted them all together. We then soldered the wire and the copper on the light strip with the solder. After that, we soldered them togther and put a rubber like protection on the wire and the copper. And used the solder pro to make the rubber fit it perfectly on it. I didn't have enough time to do all of it though because we didn't have enough time.